Using the supplied brackets
This procedure describes how to install the switch in an equipment rack using the supplied brackets.
The brackets secure the chassis and prevent it from sliding around during vibration or when
inserting or extracting transceivers.
Caution:
Do not mount the chassis in a rack without using a customer-supplied tray under the chassis.
The chassis weight will cause damage to a rack, especially in an environment with vibration or
in an earthquake prone area.
Procedure
1. Disconnect the power cord from the switch.
2. Attach a bracket to each side of the switch using a #2 Phillips screwdriver as illustrated
below.
January 2015 Installation Job Aid for Avaya Virtual Services Platform 7200 Series 32
To Next Page
Loading...
