IMPORTANT
READ CAREFULLY BEFORE USING INSTRUMENT
GENERAL SAFETY
Your PSA-65C is connected to an AC power source (110, 220 or 240 VAC depending
on model) and it is important that all components of your test bench are properly grounded to
reduce the possibility of electrical shock.
Use properly grounded electrical outlet or extension cord.
Do not cut grounding pin from line cord plug.
Use fuses of correct amperage.
Disconnect AC line cords when working inside electrical appliances or instruments.
Do not service equipment alone - Work with someone who can administer help and
first aid.
Persons working with line voltages should be trained in and capable of performing first
aid and resusitation techniques.
IMPORTANT CAUTIONS
Do not couple the input of the PSA-65C to high power RF sources such as walkie-talkies,
CB radios, transmitters, etc. Signal levels in excess of +15 dBm can damage the sensitive
mixers in the instrument resulting in otherwise unnecessary expense and repairs.
HANDLE WITH CARE - The PSA-65C Portable Spectrum Analyzer is a precision
instrument designed for normal operating and handling conditions. It should be protected from
abuse as dropping, throwing or other rough handling. When being transported in a vehicle or
shipped, the PSA-65C must be cushioned and protected against shock and vibration.
To Next Page
Loading...
Need help?
General
