20
Storage
• Press the bubbling button to blow out the water inside the jet holes. Unplug the
pump, remove the filter cartridge from the inner wall of the pool.
• Use a towel to wipe off the pool, dry 24 hours.
• Push the valves to deflate the pool.
• Fold the pool.
It is recommended that store the SPA in its original package in a warm dry place.
Repair kit
Little holes or puncture can be repaired with the repair kit included and glue reserved to
pool liner.
• Find the leak.
• Thoroughly clean the area surrounding the leak.
• Cut a piece of repair material in round shape, which should be larger than the
damaged area.
• Apply adhesive to the underneath side of the patch and around the area to be
repaired.
• Put the patch on the damaged area and press down firmly. Allow 12 hours for repair
to dry. After patch has dried, apply glue around the edges for a complete seal (dry 4
hours).
To Next Page
Loading...
