To Next PageTo Next PageWhy my aventon Bicycle does not work?
Your Aventon Bicycle might not be working due to several reasons: insufficient battery power (charge the battery), faulty connections (clean and repair connectors), the battery not being fully seated in the tray (install battery correctly), improper turn-on sequence (use the proper sequence), brakes being applied (disengage brakes), or a blown 40a discharge fuse (replace the fuse).
What to do if my Aventon Bicycle battery will not charge?
If your Aventon Bicycle battery isn't charging, check the following: ensure the charger is well-connected by adjusting the connections. If that doesn't work, the charger, battery, or wiring might be damaged and need replacement or repair. Also, check and replace the charge fuse if it's blown.
How to improve the range of my Aventon Bicycle?
To improve the range of your Aventon Bicycle, consider these factors: ensure proper tire pressure (adjust as needed), check battery connections and charge (or replace if faulty), avoid excessive hills, headwinds, braking, and heavy loads (assist with pedals or adjust your route). Also, balance the battery if it has been discharged for a long time without regular charges, is aged, damaged, or unbalanced. Finally, ensure your brakes are not rubbing and adjust them if necessary.
Why the motor on my Aventon Bicycle doesn't respond when powered on?
If the motor on your Aventon Bicycle doesn't respond when powered on, the issue could be due to loose wiring (repair or reconnect), a loose or damaged throttle (tighten or replace), a loose or damaged motor plug wire (secure or replace), or a damaged motor (repair or replace).
Why does my Aventon Bicycle have irregular acceleration and reduced top speed?
Irregular acceleration and reduced top speed on your Aventon Bicycle could be due to insufficient battery power (charge or replace the battery), a loose or damaged throttle (replace the throttle), or a misaligned or damaged magnet ring (align or replace the magnet ring).
How to fix strange noises from the wheel or motor of my Aventon Bicycle?
Strange noises from the wheel or motor of your Aventon Bicycle may be caused by loose or damaged wheel spokes or rim (tighten, repair, or replace), or loose or damaged motor wiring (reconnect or replace the motor).
General| Weight | 68 lbs |
|---|---|
| Suspension | Front Suspension Fork |
| Foldable | Yes |
| Battery | 48V 14Ah (672Wh) |
| Top Speed | 20 mph |
| Tires | 20" x 4" |
| Display | LCD display |
| Gears | 7-speed |
| Throttle | Yes |
| Lights | Integrated Lights |
