Need help?Do you have a question about the aventon LEVEL 2020 and is the answer not in the manual?
Controls display backlight brightness level from 1 (dimmest) to 3 (brightest).
Allows toggling between miles and kilometers for measurements.
Displays the system's battery voltage, locked at 48V for this model.
Sets the wheel size to ensure accurate speed and odometer readings.
Sets the pedal assist speed limit for compliance with local laws.
Adjusts spring preload for rider weight and riding style.
Stops fork movement for smooth surfaces or uphill climbs.
Resolves issues related to current limit exceeded or damaged cables.
Troubleshoots damaged throttle cables or hall sensors.
Addresses issues with motor phase wiring or controller connections.
Troubleshoots motor cable connection or hall sensor issues.
Resolves issues related to brake sensors or engagement.
Addresses overheating issues due to heavy use.
Resolves issues when the motor encounters resistance.
Addresses issues with insufficient battery voltage to operate the bike.
Troubleshoots battery supplying excessive voltage to the controller.
Fixes issues with controller-display connection or poor signal.
Checks and resolves low battery voltage or wrong battery issues.
Troubleshoots missing pedal assist due to cadence sensor issues.
Details which components are interchangeable between Aventon ebike models.
Information on fitting a suspension seatpost to the Level ebike.
Discusses the ebike's speed capabilities and limit adjustments.
Explains ebike helmet regulations based on class, age, and state.
Guidance on how to properly care for the e-bike battery.
Explains how to calculate battery capacity using Watt-Hours.
Specifies maximum rider and cargo weight limits for the ebike.
To Next Page
General
