aventon LEVEL 2020 - Getting Started with Your Ebike

LEVEL OWNER’S MANUAL
2
GETTING STARTED
The Level is operated using the control pad on the handlebars.
The control pad is located near the left-hand brake lever.
Press and hold the “M” button on the handlebar controls to turn
on the display. Now, your e-bike is ready to ride. To turn o, press
and hold “M” for 3 seconds.
The Level ebike oers pedal assist. When using pedal assist,
an electric motor supplements the rider’s own eort. To use the
pedal assist, simply start pedaling, then tap the “U” or “D” arrows
to increase or decrease the amount of pedal assist from levels
0-5. Pedal assist will engage at speeds up to 28 MPH / 45 KPH.
The Level ebike is equipped with a throttle, which is mounted
near the rider’s left thumb, to propel the bike without pedaling.
You can engage the throttle anytime the rear wheel is turning.
Once the bike is moving on throttle power, use your thumb to
control the speed of the bike. The throttle can propel you at
speeds up to 20 MPH.
The motor stops when you: stop pedaling, squeeze the brake
levers, or release the throttle. Simply start pedaling again to re-
engage the motor.