AVer F17 - Control the Document Camera; Set up Your Display; Basic Setup; Advanced Display Settings

Last updated: 21/01/2022 MOLECULAR BIOLOGY LT1 Page 6 of 9
Control the document camera
1. On the lectern Crestron control panel, select PC for the projector(s) that need to show the document camera
output.
2. Basic operaons: Use the buons on the document camera control panel.
3. Advanced features: Open Sphere 2 on classroom PC desktop.
Set up your display
Basic setup
1. Set the switch on the right-hand side of the document camera to RGB.
2. Turn the document camera on. The power light turns solid blue.
3. Place your item on the display surface.
4. Adjust the document camera as required:
Posion
Move the camera head as needed
Brightness
Use the and buons
Light
Press the LAMP buon
Focus
Press to auto focus
Zoom
Use the and buons
Advanced display settings
Adjust your contrast, white balance, exposure, and other display elements:
1. Click Camera Control.
2. Click Image adjustment to access the image sengs.
3. Adjust the sengs as required.