English-7
Making a Video Call
A computer is required to use this device.
1. Open your video collaboration application such as Zoom, Microsoft
®
Teams, Skype for Business,
Skype, Google Meet, Intel
®
Unite™, RingCentral, BlueJeans, V-Cube, LiveOn, CyberLink U
Meeting
®
, TrueConf, Adobe Connect, Cisco WebEx
®
, Fuze, GoToMeeting™, Microsoft
®
Lync™,
Vidyo, vMix, WebRTC, Wirecast, XSplit.
2. Set the VC520 Pro3 as your primary camera device in your application (Please consult your
application setup guide for details).
3. Ready to make a video call.
[Note] VC520 Pro3 is a Plug-n-Play Conference Camera. The system requires no special drivers. For
advanced setting and firmware update, please download PTZApp 2.
Making a Connection through the Browser
VC520 Pro3 has an Ethernet port for IP streaming and allows administrators to remotely control and set
up the camera via an internet access. Moreover, VC520 Pro3 also supports RTSP and RTMP functions.
For more details, please refer to user’s manual or contact our technical support.
1. Make sure the VC520 Pro3 has an internet access connection.
2. Launch PTZApp 2* ( ) and connect VC520 Pro3 to PC with USB cable.
The camera default IP address is 192.168.1.168. Click pencil icon ( ) to edit IP address**.
To Next Page
Loading...
