What to do if my Avera LED TV has no picture?
If your Avera LED TV shows no picture, first try switching to another channel as the digital TV channel signal may be weak. Ensure the correct input is selected by pressing the INPUT button. Also, check and reconnect the antenna or cable wiring.
Why is there no sound on my Avera 40AER10?
If your Avera LED TV has no sound, make sure the connected audio cables are fully inserted. Also, ensure that you have selected the correct audio source from your amplifier. Check if the mute function is enabled and, if so, press the mute button on the remote to disable it.
General| Screen Size | 40 inches |
|---|---|
| Display Technology | LED |
| Refresh Rate | 60 Hz |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Smart TV | No |
| Resolution | 1920 x 1080 |
States the TV is not designed for outdoor installation.
Details on power sources, grounding, and installation guidelines.
Grounding antennas and avoiding power line proximity.
Specifies replacement parts and post-service checks.
Instructions on servicing, damage assessment, and handling repairs.
Covers mounting, heat avoidance, and FCC regulations.
Instructions for inserting batteries into the remote.
Walkthrough for the initial TV setup.
Configuration for antenna/cable connection and scanning.
Re-scans channels after setup or provider changes.
To Next Page
