Why is there no picture on my Avera 24AER10 LED TV?
If your Avera LED TV shows no picture, the digital TV channel signal may be weak, so try another channel. Ensure the correct input is selected by pressing the INPUT button. Also, check the antenna or cable wiring and reconnect if necessary.
What to do if my Avera 24AER10 LED TV has no sound?
If your Avera LED TV has no sound, first check that the connected audio cables are completely inserted. Make sure you've selected the correct audio source from your amplifier. Also, the mute function may be enabled, so press the mute button on the remote.
Why is my Avera 24AER10 LED TV remote control not working?
If the remote control for your Avera LED TV isn't working, try replacing the batteries with new ones and ensure the battery polarity is correct. Also, point the remote directly at the TV’s IR receiver.
What to do if my Avera 24AER10 LED TV cannot receive certain channels through the antenna?
If your Avera LED TV cannot receive certain channels through the antenna, perform a Channel Scan to add channels into the TV tuner memory. Readjust your antenna and retry Auto Channel Scan. The signal from the TV station may be weak in your area.
What to do if my Avera LED TV is blocked on certain channels?
If your Avera LED TV is blocked on certain channels, perform a Channel Scan to add channels into the TV tuner memory. Check whether the channel was deleted. Also, check parental control settings.
Why does my Avera 24AER10 LED TV have video noise or choppy picture?
If your Avera LED TV is showing video noise or a choppy picture, try readjusting the antenna. Also, keep the TV away from noise sources, such as neon lights and microwave appliances.
How to fix no color on Avera 24AER10 LED TV?
To fix a no color issue on your Avera LED TV, check the video installation of your external A / V equipment.
Why is my Avera 24AER10 showing a black box on the screen?
If your Avera LED TV is showing a black box on the screen, the “Text” option may be enabled and no text is available. Press the CCD button on the remote control to turn it off.
What to do if my Avera 24AER10 has no power?
If your Avera LED TV has no power, the batteries in the remote control may need replacing. Also, ensure the AC plug is securely re-attached to the wall outlet.
Lists the items included in the TV package for setup and use.
Instructions for inserting batteries into the remote control handset.
Describes the physical layout of the TV's front and side panels.
Details the back panel connections and how to remove the TV stand.
Guide for connecting the TV to antenna, cable, or satellite sources.
Steps to connect devices using HDMI for optimal video and audio.
How to connect external equipment using component video and audio jacks.
Guide for connecting devices via composite AV cables for good video performance.
Instructions for connecting a PC to the TV using VGA and audio cables.
How to connect the TV to a home theater system for enhanced audio.
Guides through the first-time setup process including language and channel scanning.
How to set up channels and perform an automatic scan for broadcast reception.
Options to adjust picture quality like brightness, contrast, color, and sharpness.
Adjustments for sound modes, bass, treble, MTS, and audio language.
Settings for local time zone, daylight saving, and sleep timer.
Configure language, menu display, closed captions, and factory reset options.
Activate and customize closed caption text features for on-screen display.
Adjust image position and settings when connected to a PC.
Block programming based on TV ratings and MPAA guidelines.
General| Screen Size | 24 inches |
|---|---|
| Display Technology | LED |
| Resolution | 1366 x 768 |
| Aspect Ratio | 16:9 |
| Refresh Rate | 60 Hz |
| HDMI Ports | 1 |
| USB Ports | 1 |
| VGA Port | 1 |
| Built-in Speakers | Yes |
To Next Page
