Need help?Do you have a question about the Avery Dennison ALS 204 and is the answer not in the manual?
General| Print Resolution | 203 dpi |
|---|---|
| Print Method | Thermal transfer |
| Maximum Print Width | 104 mm (4.09") |
| Processor | 32-bit RISC processor |
| Interfaces | USB 2.0, Ethernet 10/100, Serial RS-232 |
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
| Power Supply | 100-240V AC, 50/60Hz |
| Label Material Compatibility | Paper |
| Supported Operating Systems | Windows |
| Ribbon Type | Wax, wax-resin, resin |
| Ribbon Core Size | 25.4 mm (1") |
Covers manual validity, copyright, manufacturer, and document conventions like symbols and risk notes.
Details personnel qualifications, operational safety, before production checks, and unit warning notes.
Identifies main components and provides a general view of the label dispenser.
Lists detailed technical data including dispensing speed, labels, sensors, and power requirements.
Explains the two available designs: Right-handed (RH) and Left-handed (LH) versions.
Describes available optional features and accessories for the label dispenser.
Explains operating modes, functions, and using product profiles for the dispenser.
Guides on electrical connections, material insertion, and mechanical settings for initial setup.
Covers fuse replacement, cleaning agents, and routine maintenance tasks.
Details error messages, warnings, and lists of common operational issues and their causes.
Covers EC Declarations of Conformity/Incorporation and Health/Safety Requirements.
To Next Page
