Need help?Do you have a question about the Avery Weigh-Tronix 7824-125 and is the answer not in the manual?
General| Capacity | 125 lb |
|---|---|
| Readability | 0.02 lb |
| Power Supply | AC adapter |
| Display | LCD |
| Material | Stainless steel |
Details general installation procedures and considerations for the scale.
Covers power connection, grounding, and safety precautions for the scale's electrical supply.
Highlights the importance of regular checks for proper operation and calibration.
Lists various models with their respective weight capacities and resolutions in lb and kg.
Details the scale's power supply requirements, input voltage, and output specifications.
Steps for mounting the scale on a stable surface and preparing for flush countertop installation.
Step-by-step guide on how to perform a standard weighing operation.
Explains the functions of the ZERO and TEST keys and their behavior in different modes.
Introduces the four available modes: DIAG, CONF, CAL, and RE-CAL, and their purposes.
Lists alternative calibration weights that can be used for different capacities.
Introduction to accessing and using the diagnostic mode for testing and configuration viewing.
Details configuration options like Filtering, Baud, Protocol, and Print modes.
Overview of the Calibration Mode menu options: Pounds/Kilograms and Scale/Class.
Step-by-step instructions for calibrating the scale, including unit and capacity selection.
Details selecting units (LBS/1000G) and capacity (SCALE/CLASS) for calibration.
Instructions for performing the zero load and weight load steps during calibration.
Introduction to the RE-CAL mode for changing resolution or rounding without weights.
Lists standard commands like W<CR>, S<CR>, Z<CR> and their scale responses.
Provides steps to resolve issues when the scale display is blank or shows no power.
Outlines steps to fix issues with missing or extra segments on the scale's display.
Steps to resolve issues where the scale does not return to zero or displays incorrect weight.
Steps to fix problems causing the display to show unrecognized characters.
Instructions to resolve issues indicated by dashes for under capacity conditions.
Instructions to resolve issues indicated by dashes for over capacity conditions.
Steps to resolve issues when the scale is not transmitting data to the host device.
Steps to resolve issues where the ZERO and TEST keys do not function.
To Next Page