AVHzY CT-2 - Page 27

Since the
negative line and positive
line usually have the same dimension and
material
, the result is reliable in the
most
cases,.
The procedure of the
bypass mode
is :
1.
Connect
the meter to the adapter
by the
USB-A male
port. Then plug-in a
constant-current load(>500mA)
into the
USB-A female
port.
2. Plug
both sides
of the
Type-C 2 Type-C
cable
into
both Type-C female port
on the
meter.
3. The resistance is shown on the screen.