FUNCTION
OPERATION
A. Rubber-covered handle
B. Air hose
C. Air chuck
D. Digital pressure gauge
E. Hose storage area
F. Start switch
G. Charger
H. LED-light
I. 12V Power adapter
J. USB Output Port
1. The battery is not fully charged. You’d better let it charge for 3-5
hours before the first use. Normal charging time is 3-5 hours
when the battery is completely dead.
2. Replace a new battery when tool performance begins to diminish;
Severe heat is most destructive to a battery; The more heat it
generates, the faster the battery loses power. A battery that gets
too hot can have a shortened life.
3. Never over-discharge a battery when using the tool even after tool
performance has decreased. When tool performance begins to
diminish, please stop letting the tool work and recharge the battery
for optimal performance.
Battery Pack
A
B
C
D
E
F
G
H
I
J
To Next Page
Loading...