Avidsen TEHA CONNECT - C - INSTALLATION

EN3EN 2
A - SAFETY INSTRUCTIONS
1 - OPERATING PRECAUTIONS 04
2 - INSTALLATION PRECAUTIONS 04
3 - MAINTENANCE AND CLEANING 05
4 - RECYCLING 05
B - PRODUCT DESCRIPTION
1 - KIT CONTENTS 06
2 - EQUIPMENT REQUIRED (NOT
INCLUDED) 06
C - INSTALLATION
HAZARD ANALYSIS 07
1 - ELIMINATING HAZARDS 08
2 - INSTALLING ACTUATORS 09
2.1 - maximum opening angle 10
3 - INSTALLING THE SWITCHGEAR 14
4 - INSTALLING THE FLASHING LIGHT 15
5 - INSTALLING THE SET OF PHOTOCELLS 16
6 - CONNECTIONS 18
6.1 - The mains electricity 18
6.2 - Actuators 19
6.3 - Flashing light 19
6.4 - Photocells 20
6.5 - Control parts (optional) 21
6.6 - HomeGate connected module 21
6.7 - Backup battery (optional ref. 580293) 22
6.8 - solar power kit 22
D - BEGINNING OPERATION
1 - SETTINGS INTERFACE 23
2 - QUICK SETTINGS 23
2.1 - Self-learning 23
2.2 - Adding remote controls 24
2.2.1 - Programming with the card 25
2.2.2 - Copy programming 25
2.3 - Deleting all remote controls 25
3 - ADVANCED SETTINGS 25
3.1 - Menu 1 27
3.1.1 - Operating mode (automatic closing
or semi-automatic closing) 28
3.1.2 - Time delay (for automatic mode) 28
3.1.3 - Motor force 29
3.1.4 - Motor speed 29
3.2 - Menu 2 29
3.2.1 - Acceleration/deceleration at end
of travel 30
3.2.2 - Photocell mode 30
3.2.3 - Type of gate 31
3.2.4 - Stop tolerance 31
3.3 - Menu 3 32
3.3.1 - Closing time interval 32
   3.3.2-Flashinglightpre-ashingtime 32
CONNECTED MOTOR DRIVE KIT WITH ACTUATORS
CONTENTS