What to do if Avidyne GPS radar sensor is not communicating?
If the Avidyne GPS radar sensor is not communicating, first ensure the radar sensor is turned on and valid. Next, check that the EX5000 is properly seated in its tray. Finally, verify the system wiring.
Why is radar automatic standby disabled on my Avidyne Entegra EX5000 MFD GPS?
If the radar automatic standby is disabled on your Avidyne GPS, ensure that the GPS/FMS is ON and valid. Also, verify the system wiring. For further troubleshooting guidance, consult the RADAR Sensor Installation and User’s Manual.
What to do if I see invalid GPS data on my Avidyne system when the radar is ON?
If you are getting invalid GPS data and the radar is ON, first verify that the GPS/FMS is ON and valid. Also, verify system wiring. For further troubleshooting guidance, consult the RADAR Sensor Installation and User’s Manual.
How to fix invalid radar sensor data on Avidyne Entegra EX5000 MFD?
If the radar sensor data is invalid on your Avidyne GPS, cycle power on the EX5000. For further troubleshooting guidance, consult the RADAR Sensor Installation and User’s Manual.
What to do if Avidyne Entegra EX5000 MFD GPS radar sensor has failed?
If the Avidyne GPS radar sensor has failed, check the R/T configuration module error log. For further troubleshooting guidance, consult the RADAR Sensor Installation and User’s Manual.
Describes the core features and capabilities of the EX5000 MFD.
Details features available as optional add-ons for the EX5000.
Provides details about the physical attributes and components of the EX5000 MFD.
Lists the technical data, dimensions, and electrical requirements of the MFD.
Outlines the TSO/ETSO certifications applicable to the MFD.
Explains the various sensor and system configurations available for the MFD.
Guidance on optimal placement and viewing for the MFD.
Instructions on how to physically install the MFD unit.
Details on power, dimming, and sensor connection wiring.
Specifics on connecting GPS, FMS, sensors, and other avionics.
Steps for initial power-up and basic functional checks.
Procedure for installing optional functionality using activation utilities.
Instructions for saving and restoring MFD configuration settings.
How to access and navigate the MFD's maintenance interface.
Configuration steps for GPS and FMS systems.
Configuration steps for lightning detection sensors.
Configuration steps for the Terrain Awareness and Warning System.
Configuration steps for traffic detection sensors.
Steps for configuring and calibrating radar systems.
Configuration for displaying engine data.
Setting up MFD based on aircraft type and options.
Configuring map display and heading sources.
Verifying system settings and operation via info pages.
Testing for interference between installed systems.
Verifying satellite data reception.
Procedures for cleaning the MFD screen.
Loading NavData, charts, and engine data.
Contacting Avidyne for assistance with product questions.
Procedures for returning units for repair or service.
General| Moving Map | Yes |
|---|---|
| Display Size | 10.4 inches |
| Display Type | LCD |
| Interfaces | ARINC 429, RS-232 |
| Certifications | TSO-C115b |
| GPS Receiver | WAAS GPS |
| Navigation | GPS |
To Next Page
