6. Tighten the wall mount screws to secure the wall mount to the bracket. Use the T20 Torx key provided in
the camera package.
7. Wrap the thread of the NPT adapter with the supplied Teflon sealing tape to create a water tight seal
around the camera connection. There should be three to five turns around the entire threaded surface.
When applying the Teflon sealing tape, wrap the tape clockwise.
This will ensure the tape does not unravel when installing the mating parts together.
Tip: Always apply Teflon tape to threaded mounts to help prevent the threads from binding.
Installing the Pendant Wall Mount 9
To Next Page
Loading...