3. Make sure the mount adapter is secured, then tighten the lock nut to fix the dome camera to its final
position.
Assigning an IP Address
The camera automatically obtains an IP address when it is connected to a network.
NOTE: If the camera cannot obtain an IP address from a DHCP server, it will use Zero Configuration Networking
(Zeroconf) to choose an IP address. When set using Zeroconf, the IP address is in the 169.254.0.0/16 subnet.
The IP address settings can be changed using one of the following methods:
l Camera's web browser interface: http://<camera IP address>/
l Network video management software application (for example, Avigilon Control Center (ACC)™ software).
l ARP/Ping method. For more information, see Setting the IP Address Using the ARP/Ping Method on
page20.
NOTE: The default camera username is administrator with no password.
Accessing the Live VideoStream
Live video stream can be viewed using one of the following methods:
Assigning an IP Address 12
To Next Page
Loading...