5
English
English
Mounting the Dome Camera
The dome camera must be mounted on a 1-1/2” NPT male threaded
wall or ceiling mounting bracket. The mounting bracket is not included
in the camera package.
Perform the following steps to mount the dome camera to a ceiling or
wall:
1. If installing outdoors, wrap the supplied Teflon sealing tape
around the thread of the mounting bracket to create a
water tight seal.
2. Remove the camera module from the pendant mount by
loosening the 2 side screws holding it in place.
Caution — The dome camera must be mounted as
instructed below or problems with moisture may arise and
will not be covered by the dome camera warranty.
To Next Page
Loading...
