3
English
Installation
Required Tools and Materials
• Small slotted screwdriver with 5/64” or 2 mm blade width
— for connecting power when not using Power over
Ethernet.
• Mounting bracket, enclosure or tripod.
Camera Package Contents
Ensure the package contains the following:
• Avigilon High Definition IP Camera
• Terminal block
Installation Steps
Complete the following procedures to install the camera.
1. Mounting the Camera on page 3
2. Connecting Cables on page 4
3. Assigning an IP Address on page 5
4. Accessing the Live Video Stream on page 5
5. Aiming and Focusing the Camera on page 5
6. (Optional) Configuring Onboard Storage on page 6
Mounting the Camera
Camera mounting points are provided on both the top and bottom of
the camera body. Use these mounting points to mount the camera on a
bracket, in an enclosure, or on a tripod. The mounting points have ¼”-
20 UNC threaded holes which allow them to accept standard
photographic mounting bolts.
Consult the installation instructions provided with the bracket,
enclosure or tripod for detailed mounting instructions.
To Next Page
Loading...
