4. If your camera supports onboard storage, select how the camera keeps time.
l If you prefer to manually set the camera’s date and time, enter the date, time and time zone on this
page. Select the Automatically adjust clock for Daylight Savings Time check box if required.
l If you prefer to auto-synchronize the camera’s date and time with an NTP server, configure the NTP
server on the Network page. For more information, see Network below.
5. (HD Bullet Camera and HD Multisensor Dome Camera only) Select the Disable configuration ethernet port
check box to disable the secondary Ethernet port underneath the camera.
6. (H.264 HD Cameras and HD Bullet Cameras only) Select any of the Overlay Setting check boxes to display
and stamp that information on the camera's video stream. The options are:
l Display Date
l Display Name
l Display Time
l Display Location
l Display GMT Offset
7. Click Apply to save your settings.
Network
On the Network page, you can change how the device connects to the server network and choose how the
device keeps time.
NOTE: You can only set the HTTPS port, the RTSP port, and the NTP Server in the camera web interface.
8 Network
To Next Page
Loading...
