Image and Display
NOTE: This setup page is not available for encoders, and some options are not available if they are not
supported by the camera.
On the Image and Display page, you can control the camera’s video display settings.
The Image and Display page includes an image panel that displays the camera’s live video stream. When you
click Apply to save your changes, the video stream is updated.
Avigilon cameras have electronic zoom and focus controls, so you can set the camera’s zoom and focus through
this page as well.
1. Use the Zoom controls to adjust the camera’s zoom position.
2. If the camera has a built-in auto focus feature, you can select the Continuous Focus option to enable the
camera to focus itself whenever the scene changes.
3. To manually focus the camera, select Open in the Iris drop down list then use the Focus buttons to focus
the camera.
The left arrow buttons focus the camera towards Zero (0), and the right arrow buttons focus the camera
towards Infinity. Click the Auto Focus button to enable the camera to automatically focus once.
NOTE: Once the focus is manually set, it will not change.
4. If the camera becomes defocused while in Monochrome mode at night, adjust the IR Focus Offset setting
to compensate for the focus shift caused by the built-in or external IR illuminators.
Image and Display 11
To Next Page
Loading...
