EasyManua.ls Logo

Avigo BICYCLE - Braking System Troubleshooting; Wheel and Steering Problems

Default Icon
125 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
109
PROBLEM POSSIBLE CAUSE REMEDY
Freewheel does not rotate.
Brakes not working effectively.
When applying the brakes they
squeal/squeak.
Knocking or shuddering when
applying brakes.
Wobbling wheel.
- Freewheel internal pawl pins are
jammed.
- Brake blocks worn down.
- Brake blocks/rim greasy,wet or
dirty.
- Brake cables are binding,
stretched or damaged.
- Brake levers are binding.
- Brakes out of adjustment.
- Brake blocks worn down.
- Brake block toe-in incorrect.
- Brake blocks/rim dirty or wet.
- Brake arms loose.
- Bulge in the rim or rim out of true.
- Brake mounting bolts loose.
- Brakes out of adjustment.
- Fork loose in head tube.
- Axle broken.
- Wheel out of true.
- Hub comes loose.
- Headset binding.
- Hub bearings collapsed.
- Quick release mechanism loose.
- True wheel or take to a bike shop.
- Tighten bolts.
- Center brakes and/or adjust
brake block toe-in.
- Tighten headset.
- Replace axle.
- True wheel.
- Adjust hub bearings.
- Adjust headset.
- Replace bearings.
- Adjust QR mechanism.
- Replace blocks.
- Correct block toe-in.
- Clean blocks and rim.
- Tighten mounting bolts.
- Replace brake blocks.
- Clean blocks and rim.
- Clean, adjust, or replace cables.
- Adjust brake levers.
- Center brakes.
- Lubricate, if problem persists,
replace freewheel.
TROUBLE SHOOTING
TROUBLE SHOOTING
|

Table of Contents