Aviom A-16II User Manual

58 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

P e r s o n a l M i x e r

C o n s o l e P e r s o n n e l l e

A-16

9301 1006 0001F rev 2.00

© 2009 Aviom, Inc.

User Guide

Table of Contents

Other manuals for Aviom A-16II

Quick Reference2 pages

Questions and Answers:

V
Vanessa JacksonAug 15, 2025
How to troubleshoot no audio from Aviom Mixer outputs?
- J
  Juan PhillipsAug 15, 2025
  If you're not getting any sound from your Aviom Mixer outputs, start by checking the levels on the main mixing board connected to the system. Also, inspect the cables and connections between the main mixer and the personal monitor system. The signal LEDs on the front of the input module can help you confirm if audio is being received. Try replacing the cables to eliminate them as a potential issue. Ensure that all channels and the master volume on the personal mixer are not set to zero. Finally, verify that the A-Net cables are correctly connected.
J
Joseph AliAug 18, 2025
Why the A-Net LED is on but there is no sound from Aviom Mixer?
- J
  James ParsonsAug 18, 2025
  The A-Net Active LED indicates that the input to the receiving device is properly connected to another A-Net device. It doesn't guarantee that all devices in the system are correctly connected. If you have two Aviom Mixers connected, the second mixer's A-Net LED might light up simply because it's connected to the first. Ensure each device in the chain has a Category 5 cable plugged into it. Also, verify that the A-Net cables are connected in the correct order, with the cable from the first mixer connected to the A-Net In jack and subsequent devices connected from the Out of the previous device to the In of the next.

Aviom A-16II Specifications

General

Channels	16
Stereo Channels	8
Inputs	16
Output Type	Analog
Output	16
Network Protocol	A-Net
Power	12V DC
Power Supply	External
Sample Rate	48 kHz
Bit Depth	24-bit
Dimensions	1.75"
Input Connectors	RJ45
Output Connectors	1/4" TRS

Summary

Important Safety Instructions

Aviom, Inc. Limited Warranty

A-16II Personal Mixer Components

Monitor System Setup

Power Connection

Connect the DC power supply to the A-16II Personal Mixer unit.

System Connections

Connect A-Net compatible devices using Cat-5e cables in a series.

Audio Connections

Powering Up

A-16II Features

Operational Modes

Explains the different modes: Mix Mode, Recall Mode, and Group Mode.

Global Controls

Tone Controls

Use Bass and Treble controls to adjust overall mix frequencies.

Master Volume

Personal Mixer Rear Panel

A-Net Connectors

Describes the A-Net In and Out jacks for system connectivity.

DC Power Input

Details the connection point for the DC power supply.

Audio Outputs

Explains the headphone/line output jack and its uses.

Making a Mix

The Editing Interface

Explains the interface for editing channel settings like volume and pan.

Setting Channel Volume

Setting Pan

Details how to adjust channel panning using the Pan knob and LEDs.

Linking Channels

The Mute and Solo Functions

Solo a Channel

How to listen to a single channel by muting others.

Mute a Channel

Unmute a Channel

How to unmute a previously muted channel.

Creating Groups

Saving a Preset

Troubleshooting

No audio from Personal Mixer outputs

Can't change Presets

I don't think my Preset was saved.

Can't hear a channel that is part of a Group

The A-Net LED is on, but there is no sound

Preset recalled with incorrect link/mono status

A-16II Personal Mixer Specifications

Related product manuals

Preview: Aviom A360

Preview: Aviom A320