AVIRA PROFESSIONAL SECURITY - Popup Settings

Reference: Configuration options
Avira Professional Security - User Manual (Status: 23 Sep. 2011) 137
11.5.5 Popup settings
Options available in expert mode only.
Inspect process launch stack
If this option is enabled, the process stack inspection allows a more accurate
control.The FireWall will assume that any of the untrustworthy processes in the stack
may actually be the one accessing the network through its child process. Therefore a
different popup window will be opened for each untrustworthy process in the process
stack. This option is disabled as the default setting.
Allow multiple popups per process
If this option is enabled, every time an application is making a network connection, a
popup is triggered. Alternatively you will be informed only on the first connection
attempt. This option is disabled as the default setting.
Remember the action for this application
Always enabled
When this option is enabled, the option "Remember action for this application" of
the dialog box "Network event" is enabled as the default setting.
Always disabled
When this option is enabled, the option "Remember action for this application" of
the dialog box "Network event" is disabled as the default setting.
Enabled for signed applications
When this option is enabled, the option "Remember action for this application" of
the dialog box "Network event" is automatically enabled during network access by
signed applications. Signed applications are distributed by so-called "trusted vendors"
(see Trusted Vendors).
Remember last used state
When this option is enabled, the option "Remember action for this application" in
the dialog box "Network event" is enabled in the same way as for the last network
event. If the option "Remember action for this application" was enabled, this option
is enabled for the following network event. If the option "Remember action for this
application" was disabled for the last network event, this option is also disabled for
the following network event.
Show details
In this group of configuration options, you can setup the display of detailed information in
the Network event window.