Installation and uninstallation
Avira Professional Security - User Manual (Status: 23 Sep. 2011) 19
The Installation Wizard is closed and the Configuration Wizard will open.
3.5 Configuration Wizard
At the end of a user-defined installation, the configuration wizard is opened. The
configuration wizard enables you to define custom settings for your Avira product.
Click Next in the welcome window of the configuration wizard to begin configuration
of the program.
The Configure AHeAD dialog box enables you to select a detection level for the
AHeAD technology. The detection level selected is used for the System Scanner
(On-demand scan) and Realtime Protection (On-access scan) AHeAD
technology settings.
Select a detection level and continue the installation by clicking Next.
In the following dialog box Select extended threat categories, you can adapt
the protective functions of your Avira product to the threat categories specified.
Where appropriate, activate further threat categories and continue the installation by
clicking Next.
If you have selected the Avira FireWall installation module, the Default rules for
accessing the network and using network resources dialog box appears.
You can define whether the Avira FireWall should permit external access to
enabled resources as well as network access by applications of trusted
companies.
Enable the required options and continue the configuration by clicking Next.
If you have selected the Avira Realtime Protection installation module, the
Realtime Protection start mode dialog box appears. You can stipulate the
Realtime Protection start time. At each computer reboot, the Realtime Protection
will be started in the start mode specified.
Note
The specified Realtime Protection start mode is saved in the registry and cannot
be changed via the Configuration.
Note
When the default start mode for Realtime Protection (Normal start) has been
chosen and the logon process upon startup is carried out fast, programs
configured to start automatically upon startup might not be scanned because
they might be up and running before the Realtime Protection has been started
completely.
Enable the required option and continue the configuration by clicking Next.
To Next Page
Loading...