AVIRA PROFESSIONAL SECURITY - Page 182

Reference: Configuration options
Avira Professional Security - User Manual (Status: 23 Sep. 2011) 182
Wildcard
Description
%VIRUS%
contains the name of the detected virus or of the unwanted program
%FILE%
contains the path and file name of the affected file
%COMPUTER%
contains the name of the computer on which the Realtime Protection is
running
%NAME%
contains the name of the user who accessed the affected file
%ACTION%
contains the action performed after the detection of the virus
%MACADDR%
contains the MAC address of the computer on which the Realtime
Protection is running
Default
The button restores the predefined default text for an alert.
System Scanner network alerts
Enable network alerts
If this option is enabled, network alerts are sent. This option is disabled as the default
setting.
Note
To be able to activate this option, at least one recipient must be entered under
Configuration > General > Alerts > Network.
Message to be sent
The window shows the message sent to the selected workstation when a virus or
unwanted program is detected. You can edit this message. A text may contain a
maximum of 500 characters.
You can use the following key combinations for formatting the message: