AVIRA PROFESSIONAL SECURITY - Page 27

Installation and uninstallation
Avira Professional Security - User Manual (Status: 23 Sep. 2011) 27
 AVWinIni (optional)
Specifies the destination path for the configuration file that may be copied during
installation. The file name must be specified completely (fully qualified).
Example: AVWinIni=d:\inst\config\avwin.ini
 Password
This option assigns the password that was set for the (modification) installation and
uninstallation to the setup routine. The entry is only scanned by the setup routine
when a password has been set. If a password has been set and the password
parameter is missing or wrong, the setup routine is aborted.
Example: Password=Password123
 WebGuard
Installs the Avira Web Protection.
1: Install Avira Web Protection
0: Do not install Avira Web Protection
Example: WebGuard=1
 RootKit
Installs the Avira Rootkits Protection module. Without Avira Rootkits Protection the
System Scanner will not be able to scan for rootkits on the system!
1: Install Avira Rootkits Protection
0: Do not install Avira Rootkits Protection
Example: RootKit=1
 ProActiv
Installs the Avira ProActiv component. Avira ProActiv is a pattern-based detection
technology that enables as yet unknown malware to be detected.
1: Install ProActiv
0: Do not install ProActiv
Example: ProActiv=1
 FireWall
Installs the Avira FireWall component. Avira FireWall monitors and controls the
incoming and outgoing data traffic on your computer system and protects your
computers from threats originating from the Internet or other network environments.
1: Install FireWall
0: Do not install FireWall
Example: FireWall=1