Pana40 Plus
2-in-1 & 3-in-1 Mechanical Edges
Installation Guide
INSTALLATION
Dynamic Installation
+ Position each detector 5mm above the sill
+ Ensure that the detectors are aligned level and straight with each other
+ Please refer to the lift/elevator OEM manual for the correct installation of the mechanical safety edges
+ Secure the cables with the P-clips and screws provided. Ensure there are no tight bends and the cables are not
stressed or stretched as the doors move
Ref No. 745 850 (ML) V01
Fig 1: Proles
Connect with 841 Controller
Pana40 Plus edges must be installed with an 841 Pana40 Plus Controller. Refer to the Controller Installation Guide for
details on conguration.
2in1 : 28mm prole
(745 050)
2in1: 20mm prole (755 200)
3in1: 20mm prole (775 200)
2in1: 22mm prole (755 220)
3in1: 22mm prole (775 220)
2in1: 25mm prole (755 260)
3in1: 25mm prole (775 260)
60 60 55 60
28
28
28
34
19
28
16
20
18
22 25
Memco is a brand of Avire
Avire Ltd
Unit 1, The Switchback
Gardner Road
Maidenhead
Berkshire
SL6 7RJ, UK
T: 01628 540100
F: 01628 621947
E: sales.uk@avire-global.com
W: www.memco-global.com
W: www.avire-global.com
P40+2in1&3in1 IG V01 (GB)_PA/07/12/2016
To Next Page
Need help?
General
