Avision AD345GF - Page 149

User’s Manual
8-6
Question:
More than one sheet of paper are
fed into the scanner.
Answer:
1) Open the scanner front door.
2) Remove the multi-fed sheets.
3) Close the front door.
4) Flatten the corners and edges.
Loosen the paper before putting it
into the paper guide again.
5) Check the feeding roller condition.
If necessary, follow the cleaning
directions in section 8.2 and
perform the cleaning.
Question:
Paper becomes skewed in the
scanner.
Answer:
1) Use the slide guide to keep the
paper path straight.
2) Check the condition of the feeding
roller. If necessary, follow the
cleaning directions in Section 8.2
and perform the cleaning.