6-1
6. Using the Buttons
The following picture shows the 2 buttons on the scanner.
6.1 Installing Button Manager Lite 2
To use the buttons on the scanner, you need to install the
Button Manager. To ensure the Button Manager work
properly, please FIRST install Button Manager before
installing the scanner driver.
Installing the Button Manager is easy. Insert the supplied
CD to your CD-ROM drive and follow the instructions on the
screen to complete the installation of the Button Manager.
Button Manager provides you an easy way to scan your
document and then link the scanned image to your
designated software application. All this can be done by a
simple touch of the button on the scanner. Yet, before you
scan, it is recommended to check the button configurations
first to ensure a proper file format and a destination
application.
ID Card ID Photo
To Next Page
Loading...
