User’s Manual
Front/Rear Auto Color Detection:
Click to automatically detect and scan the front or the rear page
of your color document in color image mode. If your document
is in colors, the scanner will automatically scan the document
into a color image. If your document is non-color, you can
choose the output to be either B&W or Gray from the Non-Color
Selection option. This option is useful when you have a mixture
of color and non-color document.
Note: If you choose Front Rear Auto Color Detection, you can
not specify the image mode of your rear page and vice versas.
Sensitivity of Auto Color Detection
If your documents contain primarily B&W text and small amount
of light or pale colors and you do not wish them to be recognized
as color image to save the file size, you can increase the
sensitivity value by moving the bar to the right to let these
images to be detected as B&W. The value ranges from 1 to 100.
The default is 37.
Original
To Next Page
Loading...
