A good control of the resolution
results a good detail of an image that
scans. The resolution is measured
by dots per inch (dpi). Normally, the
greater the dpi number, the higher
the resolution and the image file size.
Be aware that greater resolution
takes more time to scan, and more
disk space for the scanning image.
For your information, an A4 size color
image scanned at 300 dpi at True
Color mode consumes approximately
25 MB of disk space. A higher
resolution (usually means over 600
dpi) is only recommended when you
need to scan a small area at True
Color mode.
Choose a resolution value from the
drop down list. The default value is
200 dpi. Available resolutions are 75,
100, 150, 200,300, 400 and 600. Or
you may choose your desired value
by clicking the box in the right side of
the drop down list and press the
arrow key to select your desired value
and then click the Add button to
include it in the drop down list. Note:
The resolution is up to 300 dpi if an
imprinter or a MICR reader is installed
or connected to the scanner.
To Next Page
Loading...
