User’s Manual
Transport Timeout
Set the amount of time the scanner will wait and then start auto
scan after the first scan job is completed. If you have many
separate documents need to be scanned at the same scan
settings, this feature is especially useful. The default is 0. The
value ranges from 0 to 30 seconds.
Note:
1 Within the specified timeout period, if you load your
document to the feeder, the scanner starts scanning
automatically.
2 If your scanner has a flatbed option and you place your
paper on the flatbed, after the timeout period, you need
to click the Scan button on the TWAIN user interface to
start scanning.
To Next Page
Loading...
