Select to scan the front side (simplex) or
both the front side and the rear side (duplex)
of your document.
Choice: *Simplex, Duplex
Note: The duplex mode is available to scan
from the auto document feeder only.
Color Mode: Select your desired image mode.
Choice: *Color, B&W, Gray
* Default settings
4. Load a page to the auto document or place a page on the
flat bed.
5. Tap the [Start scan] button. (Choose your scanner if there
is more than one scanner connected to the network). In a
second, the scanner begins scanning the document and the
thumbnail scanned image will be displayed.
6. Tap the thumbnail image to view the entire image.
The
Thumbnail
Image
To Next Page
Loading...
