Notes: The username and password could to be null1.
For example: *000000,011,cmnet,,#
Explication: The China Mobile’s APN is “cmnet”,and the username
and
password are empty.
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’011’OK
*000000,011,cmnet,,#
Step2: Set the server’s IP & PORT
Format : *$$$$$$,015,0,IP,PORT#
For example: *000000,015,0,72.167.29.18,3308#
72.167.29.18 is our server’s IP address,3308 is the port.
If client have the server by himself,pls make sure the ip and port is
correct.
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’015’OK
*000000,015,0,72.167.29.18,3308#
Step3: Set Time Interval GPRS
Format: *$$$$$$,018,X,Y#
X: the time interval(unit:sec),Y: the times of the data have to send by
GPRS.
For example:*000000,018,60,999#
The device will send GPRS every 1 mins and no times limit.
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’018’OK
*000000,018,60,999#
Step4: Open the GPRS fuction
Format: *$$$$$$,016,X#
X: close/open the GPRS function,
For example: *000000,016,1#
To Next Page
Loading...