If the tremble sensor continuous tremble for 30 sec,device will
wake up.
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’043’OK
*000000,043,30#
2.2.3 Set the parking alarm function
Step1: open the tremble sensor of switch
Format : *$$$$$$,021,XY#
For example: *000000,021,01#
Close the sleep mode and open the tremble sensor of the above of
the set.
Of course you could open the sleep mode too.
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’021’OK
*000000,021,01#
Step 2: open the parking alarm of function
Format: *$$$$$$,110,X#
X=1,open the function ,X=0 close the function
For example: *000000,110,1#
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’110’OK
*000000,110,1#
Step 3: open the GPRS function
For example: *000000,016,1#
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’016’OK
*000000,016,1#