AVM FRITZ!DECT 210 - Registering with a FRITZ!Box

Registering with a FRITZ!Box
Action Illustration
1
Insert FRITZ!DECT 210 into an outlet near your FRITZ!Box. The DECT LED
 ashes steadily.
Power/DSL
WLAN
Fon/DECT
Connect/WPS
Info
On/Off
DECT
2
Within 2minutes, press the DECT button on your FRITZ!Box, and hold it down
until the Info or DECT LED starts  ashing.
FRITZ!DECT210 is registered with the FRITZ!Box. The Wi-Fi connection has
been established when the DECT LED on FRITZ!DECT210 lights up.
If DECT continues to  ash, registration was not successful. Remove
FRITZ!DECT210 from the power outlet and repeat the registration
process.
On/Off
DECT
On/Off
DECT
Power/DSL
WLAN
Fon/DECT
Connect/WPS
Info
3
Now insert FRITZ!DECT210 into the socket where you would like to use the
device and wait a moment for the DECT LED to light up.
If DECT keeps  ashing, test a di erent outlet closer to the FRITZ!Box.
The outlet must be located within the range of the DECT radio network
of the FRITZ!Box.
On/Off
DECT
18