AVM FRITZ!DECT 210 User Manual

Registering with a FRITZ!Box
Action Illustration
1
Insert FRITZ!DECT 210 into an outlet near your FRITZ!Box. The DECT LED
 ashes steadily.
Power/DSL
WLAN
Fon/DECT
Connect/WPS
Info
On/Off
DECT
2
Within 2minutes, press the DECT button on your FRITZ!Box, and hold it down
until the Info or DECT LED starts  ashing.
FRITZ!DECT210 is registered with the FRITZ!Box. The Wi-Fi connection has
been established when the DECT LED on FRITZ!DECT210 lights up.
If DECT continues to  ash, registration was not successful. Remove
FRITZ!DECT210 from the power outlet and repeat the registration
process.
On/Off
DECT
On/Off
DECT
Power/DSL
WLAN
Fon/DECT
Connect/WPS
Info
3
Now insert FRITZ!DECT210 into the socket where you would like to use the
device and wait a moment for the DECT LED to light up.
If DECT keeps  ashing, test a di erent outlet closer to the FRITZ!Box.
The outlet must be located within the range of the DECT radio network
of the FRITZ!Box.
On/Off
DECT
19

AVM FRITZ!DECT 210 Specifications

General

Connectivity technology	Wired
Certification	CE, WEEE
Product color	Grey, Red, White
Placement supported	Indoor/outdoor
Maximum indoor range	40 m
Maximum outdoor range	300 m
International Protection (IP) code	IP44
Maximum current	15 A
AC input voltage	230 V
AC input frequency	50 Hz
Maximum input power	3450 W
Manual	Yes
Number of smart plugs	1
Power data	Current, Voltage, kW, kWh
Operating temperature (T-T)	-20 - 40 °C

Weight and Dimensions

Depth	36 mm
Width	65 mm
Height	127 mm
Weight	207 g
Package type	Box