The base station is used to assign the telephone numbers to FRITZ!Fon. If FRITZ!Fon is registered with a
FRITZ!Box, assign the numbers in the FRITZ!Box user interface:
1. Click "DECT" in the FRITZ!Box user interface.
2. Click the (Edit) button for the respective telephone.
Important:If the telephone is not displayed yet, click the "Configure New Device" button and follow
the wizard's instructions.
3. From the drop-down list "Outgoing calls", select the number the telephone should use for making
calls.
4. Define which numbers the telephone should react to when incoming calls are received. You can select
up to ten numbers (including the number for outgoing calls).
5. Click "OK" to save the settings.
Blocking your telephone number from being displayed
You can block your telephone number from being displayed when you make a call. That way, the person
you are calling does not see your number in the display of their telephone. This function is called "caller
ID blocking" or "CLIR" (Calling Line Identification Restriction). You can either block your telephone number
(caller ID) for just a specific call or for all of the calls you make.
Requirements
The FRITZ!Fon must be registered with a FRITZ!Box.
The feature caller ID blocking (CLIR) for individual calls must have been enabled by your telephony
provider.
1 Blocking caller ID for a specific call
You can block your caller ID for just one call. After that call, your caller ID will be displayed every time you
make a call:
1. Press the "Menu" key on the telephone.
2. Scroll to "Settings" and press "OK".
3. "Telephony" > "OK" > "Anonymous call" > "OK"
4. Enable the option "Next call".
5. Press the "end call" key.
2 Permanently blocking your caller ID (for all calls)
To Next Page
Loading...
Need help?
General