Note:The link "Switch telephone books" is only available if you set up multiple telephone books in the
FRITZ!Box. If the link is not available, the correct telephone book is already displayed.
4. Click the (Edit) button for the telephone book entry you want to assign to a quick-dial key.
5. Select a telephone number from the "Telephone numbers" drop-down list.
6. Enter a number between 2 and 9 in the "Quick-dial number" field.
Important:The quick-dial number may not be assigned to any other telephone book entry yet. If the
quick-dial number is already in use, you must edit that telephone book entry first.
7. Click "OK" to save the settings.
8. Repeat steps 4 to 7 for each telephone book entry you want to call using a quick-dial number.
Configuring ring tones
FRITZ!Fon allows you to select different ring tones. In addition to the default ring tone, you can also set
the following special ring tones:
different ring tones to signal incoming calls
ring tones for specific telephone book entries
ring tone for important persons from the FRITZ!Box telephone book
ring tone for internal calls
ring tone for the alarm
You can also change the ringer volume in the telephone's menu. There you can also select the increasing
ring volume function.
1 Selecting the default ring tone
The telephone uses the default ring tone whenever you receive a call from a source for which you selected
the setting "Handset setting", "Handset external ring" or "Handset internal ring" in the user interface.
1. Press the "Menu" key on the telephone.
2. Scroll to "Settings" and press "OK".
3. "Audio" > "OK" > "Ring tone"
4. Select the desired ring tone.
5. Click "OK" to save the setting.
2 Configuring different ring tones to signal incoming calls
To Next Page
Loading...
Need help?
General