32 AutoView 3100/3200 Switch Installer/User Guide
To access the OSCAR interface Commands dialog box:
1. If the OSCAR interface is not open, press Print Screen to open the Main dialog box.
2. Click Commands to open the Commands dialog box as shown in Figure 3.15.
Figure 3.15: OSCAR Interface Commands Dialog Box
Viewing and disconnecting user connections
You can view and disconnect users through the User Status dialog box. The username (U) will
always be displayed; however, you can display either the target device name or EID number to
which a user is connected. If there is no user currently connected to a channel, the user field will be
blank and the Server Name field will display Free.
To view current user connections:
1. If the OSCAR interface is not open, press Print Screen to open the Main dialog box.
2. Click Commands - User Status to open the User Status dialog box shown in Figure 3.16 on
page 33.
To Next Page
Loading...
