Avocent DSR2035 - To Assign Names to Target Devices

28 DSR2035/8035 Switch Installer/User Guide
Figure 3.3: OSCAR Interface Names Dialog Box
NOTE: If new DSRIQ modules are discovered by the DSR2035/8035 switch, the on-screen list will be
automatically updated. The mouse cursor will change into an hourglass during the update. No mouse or
keyboard input will be accepted until the list update is complete.
To assign names to target devices:
1. In the Names dialog box, select a target device name or port number and click Modify to open
the Name Modify dialog box as shown in
Figure 3.4 on page 29.