30 DSR2035/8035 Switch Installer/User Guide
Figure 3.5: OSCAR Interface Devices Dialog Box
When the DSR2035/8035 switch discovers a cascade switch, the numbering format changes from a
DSR port only to [DSR port]-[switch port] to accommodate each target device under that switch.
For example, if a switch is connected to DSR port 6, each target device connected to it would be
numbered sequentially. The target device using DSR port 6, switch port 1, would be 06-01, the
target device using DSR port 6, switch port 2, would be 06-02, and so on.
To Next Page
Loading...
