380 DSView 3 Software Installer/User Guide
VT220 terminal emulation
Table D.8 lists the keystroke mapping (encoding) for VT220 emulation.
Esc [ ? 5 l Modes to Reset - Normal Screen Mode No/No
Esc [ ? 6 h Modes to Set - Relative Origin Mode No/No
Esc [ ? 6 l Modes to Reset - Absolute Origin Mode No/No
Esc [ ? 7 h Modes to Set - Wraparound On No/No
Esc [ ? 7 l Modes to Reset - Wraparound Off No/No
Esc [ ? 8 h Modes to Set - Auto Repeat On No/No
Esc [ ? 8 l Modes to Reset - Auto Repeat Off No/No
Esc [ ? 9 h Modes to Set - Interlace On No/No
Esc [ ? 9 l Modes to Reset - Interlace Off No/No
Esc [ 6 n Report Cursor Position - Invoked by No/No
Esc [ P1; Pc R Report Cursor Position - Response is No/No
Esc [ 5 n Status Report - Invoked by No/No
Esc [ 0 n Status Report - Response is terminal OK No/No
Esc [ 3 n Status Report - Response is terminal not OK No/No
Esc [ x or Esc [ 0 c What are you? Invoked by No/Yes
Esc [ ? 1; Ps c What are you? Response is No/Yes
Esc c Reset No/No
Esc # 8 Fill screen with Es No/Yes
Esc [ 2; Ps y Invoke Test(s) No/No
Table D.7: VT100 ANSI Mode Control Sequences (Continued)
Control Sequence Definition Encode/Decode
Table D.8: VT220 Encoding
VT220 Keyboard PC Keyboard VT220 Keyboard Byte Sequence
Delete Delete 0x7F
Left Arrow Left Arrow Esc [ D
To Next Page
Loading...