Chapter 2: Installation 21
Installing the DSR Remote Operations Software
NOTE: Installing and using the DSR Remote Operations software is optional.
If your DSView 3 software system includes DSR1021, 1022, 1024, 1020, 1030, 1031, 2020, 2030,
2035, 4020, 4030, 8020, 8030 or 8035 switches, you may use the DSR Remote Operations software
for switch access using a dial-up point to point protocol (PPP) modem connection when an Ethernet
connection is unavailable.
See DSR Remote Operations Software on page 364 for information about installing and using the
DSR Remote Operations software.
To Next Page
Loading...