AVT AVC 776 - Page 24

24
Press ”MENU” to enter main menu. You will need to
enter password to access main menu. To press “
Left ”
or “
Right ” to move digit, and to press ” Up ” or
“
Down ” to select number. To press ” ENTER ” button
to confirm password.
Ex.: PASSWORD: 0000 (Default: 0000)
PASSWORD: 0000
After keying in correct password, and confirm by
pressing ”
ENTER ” button, following screen will be
displayed.SEARCH ------- find recorded list
TIMER ------- scheduling Record
RECORD------- Record Mode Setup
CAMERA ------- Camera Channel Setup
SYSTEM ------- System Setup
EVENT -------- Event List
(MENU)
SEARCH
TIMER
► RECORD
CAMERA
SYSTEM
EVENT
To choose Record item, and press “ ENTER ” to enter
Record mode. Following screen will be displayed.
(RECORD)
► HDD OVERWRITE: NO
RECORD IPS: 25A
RECORD QUALITY : NORMAL
ALARM REC IPS: 25A
ALARM REC QUALITY : NORMAL
3.8.2 HDD OVERWRITE setup :
3.8.2.1 Press ”
ENTER ” to confirm HDD OVERWRITE setup.
3.8.2.2 Press ”
Up ” or “ Down ” to choose HDD OVERWRITE.
NO : When HDD full will stop recording
YES : When HDD full will overwrite the HDD recording
3.8.2.3 Press ”
MENU ” to exit and confirm current operation.
3.8.2.4 Press again ”
MENU ” to exit and close HDD OVERWRITE setup mode.
3.8.2.
5 If the HDDs’ capacity is only 5 GB left, it will buzz for 3 seconds; so as in 4 GB, 3 GB,
2 GB and 1GB. If the O/W Recording mode is on, it won’t have the warning buzzer.
3.8.3 RECORD IPS setup:
3.8.3.1 Press ”
ENTER ” to confirm RECORD IPS setup.
3.8.3.2 Press ” Up ” or “ Down ” to choose IPS record speed.