21
3.3.3 Color
Adjust the color performance from Brightness, Contract, Hue and Saturation. Click and drag the slider to preview
the color change on the right side of ths page and adjust the image color.
To restore the default values, click “Back to Default”
3.3.4 Audio (For selected models only)
Drag the slider to adjust the volume of the microphone and speaker.
3.3.5 Advanced
Adjust the camera parameters if necessary.
Note: The functions available depend on the model number used.
Item Description
Fixed Shutter
Shutter Speed is a function that can adjust the duration of the electronic shutter to produce optimum image quality. Select
the shutter speed suitable for your environment.
Shutter Speed
Select the shutter speed suitable for your environment.
A slower shutter speed in dark conditions will help to produce a brighter image, but will produce fewer frames per second,
which may cause images to get blurry during motion.
When “Auto” is selected, the iris mode is “AES”.
When a certain speed is selected, the iris mode is switched to “AI”, and the image brightness is available to adjust from “IRIS”.
Exposure Control This function is used to synchronize the shutter time to the fluorescent light to suppress image flickering.
Exposure Value Drag the slider to adjust the exposure level from 0 ~ 4.
Mirror Select “ON” to rotate the images horizontally based on your installation situation when necessary.
Flip Select “ON” to rotate the image 180° when necessary.
IR Control Select “Auto” to automatically enable IR LEDs at night or in the dark environment, “On” to always enable IR LEDs, or “OFF”
to disable this function.
IR Enhanced Select “On” to enhance IR LEDs performance.
To Next Page
Loading...
