EasyManua.ls Logo

Avtech AVM503 - Appendix 1 Product Specifications

Avtech AVM503
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
APPENDIX 1 PRODUCT SPECIFICATIONS
Model 1 Model 2
Network
Network Compression H.264 / MJPEG
Multiple Video Streaming
(Encode Modes, IPS, Resolution)
4 (H.264, MJPEG)
LAN Port YES
LAN Speed 10/100 Based-T Ethernet
Supported Protocols
DDNS, PPPoE, DHCP, NTP, SNTP, TCP/IP, ICMP, SMTP, FTP, HTTP, RTP, RTSP, RTCP,
IPv4, Bonjour, UPnP, DNS,UDP,IGMP, QoS
Frame Rate 30 / 25fps
Number of Online Users 10
Security
(1) Multiple user access levels with password
(2) IP address filtering
(3) Digest authentication
Remote Access
(1) Internet Explorer on Windows operating system
(2) EagleEyes on iOS & Android devices
ONVIF Compatible YES
Camera
Image Sensor 1/2.9" HD CMOS image sensor
Video Resolution 1080P to CIF
Min Illumination 0.1 Lux / F1.5, 0 Lux (LED ON)
Shutter Speed -- 1/10,000 ~ 1/7.5 (Slow shutter)
S/N Ratio More than 48dB (AGC off)
Lens f3.8mm / F1.5
Viewing Angle 83.2° (Diagonal) / 73.2° (Horizontal) / 42.8° (Vertical)
IR LED 1 unit (15 meters)
IR Shift YES
PIR Sensor
Detection Range 76° wide angle with up to 5m long distance
at 2.5m height (under 30)
White Balance ATW
AGC Auto
IRIS Mode AES
POE YES (IEEE 802.3af)
External Alarm I/O YES (1 in 1 out)
Micro SD Card Slot YES
Smart Light Control
YES
WDR
YES
Power Source (±10%) 12V / 1A
Current Consumption (±10%) -- 400mA
Operating Temperature 0~40
Others
Mobile Surveillance iPad / iPhone / Android mobile device
RTC (real-time clock) YES
Motion Detection YES
Digital Pan / Tilt / Zoom YES
3 Axis YES
Event Notification FTP / Email / SMS
Minimum Web Browsing Requirements
Intel core i3 or higher, or equivalent AMD
2GB RAM
AGP graphics card, Direct Draw, 32MB RAM
Windows 7, Windows Vista & Windows XP, DirectX 9.0 or later
Internet Explorer 7.x or later
* The specifications are subject to change without notice. ** Dimensional tolerance: ± 5mm

Related product manuals