32
Model 3 Model 4
▓ Network
Network Compression H.264 / MPEG4 / MJPEG H.264 / MJPEG
Multiple Video Streaming
(Encode Modes, IPS, Resolution)
4 (H.264, MPEG4, MJPEG) 4 (H.264, MJPEG)
LAN Port YES
LAN Speed 10/100 Based-T Ethernet
Supported Protocols
DDNS, PPPoE, DHCP, NTP, SNTP, TCP/IP, ICMP, SMTP, FTP,
HTTP, RTP, RTSP, RTCP,IPv4, Bonjour, UPnP, DNS,UDP,IGMP, QoS
Frame Rate 30 / 25fps
Number of Online Users 10
Security
(1) Multiple user access levels with password
(2) IP address filtering
(3) Digest authentication
Remote Access
(1) Internet Explorer on Windows operating system
(2) EagleEyes on iOS & Android devices
ONVIF Compatible YES
▓ Camera
Image Sensor 1/4" CMOS image sensor 1/2.9" CMOS image sensor
Video Resolution SXGA to QQVGA 1080P to CIF
Min Illumination 1 Lux / F1.5 0.1 Lux / F1.4, 0 Lux (LED ON)
Shutter Speed 1/2 to 1/10,000 sec 1/10,000 ~ 1/7.5 (Slow shutter)
S/N Ratio More than 48dB (AGC off)
Lens f3.8mm / F1.5 f2.8 ~ 12mm / F1.4 ~ F2.8
Viewing Angle
62.7° (Diagonal) / 53.7° (Horizontal) /
34.1° (Vertical)
Wide: 97.4° (Horizontal) / 58.1° (Vertical) /
111.7° (Diagonal) Tele: 27.1° (Horizontal) /
15.2° (Vertical) / ° (Diagonal)
IR LED --
3 units
(Default: up to 30 meters;
IR Enhanced Mode: up to 50 meters)
IR Shift -- YES
White Balance ATW
AGC Auto
IRIS Mode AES
POE YES (IEEE 802.3af)
External Alarm I/O YES (1 in 1 out)
Micro SD Card Slot YES
Vandal Resistance
IK08 IK10
Weather-proof
-- IP66
WDR
-- YES
Smart Light Control
-- YES
Power Source (±10%) 12V / 1A 12V / 1.5A
Current Consumption (±10%) 203mA 849mA
Operating Temperature 0℃~40℃ -20℃~40℃
▓ Others
Mobile Surveillance iPad / iPhone / Android mobile device
RTC (real-time clock) YES
Motion Detection YES
Digital Pan / Tilt / Zoom YES
Event Notification FTP / Email / SMS
Minimum Web Browsing Requirements
‧Intel core i3 or higher, or equivalent AMD
‧2GB RAM
‧AGP graphics card, Direct Draw, 32MB RAM
‧Windows 7, Windows Vista & Windows XP, DirectX 9.0 or later
‧Internet Explorer 7.x or later
* The specifications are subject to change without notice.
** Dimensional tolerance: ± 5mm
To Next Page
Loading...
